PERMEABILITY APPARATUS - SINGLE CELL,PERMEABILITY APPARATUS - THREE CELL,CONCRETE PERMEABILITY APPARATUS - SINGLE CELL,CONCRETE PERMEABILITY APPARATUS

PERMEABILITY APPARATUS - SINGLE CELL - (PA-01)

One of the durability tests of concrete is to determine permeability of water through specimen. Permeability apparatus is used for determining the permeability of cement mortar and concrete specimens of 15cm cubes cast in the laboratory.

Salient Features

Specifications : The concrete permeability apparatus comprises of a brass/gunmetal cell of squares cross-section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and T-connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. The cell assembly consists of one base plate, one metal funnel and one top plate. The pressure chamber is fitted with a pressure regulator which helps in regulating the pressure from 0-15 kg/cm sq. gauge is for indicating the pressure in the cell. A foot pump and a pressure tube is supplied to develop pressure in the chamber. The apparatus is supplied with a measuring cylinder 500cc ti measure percolated quantity of water. Pressure can also be applied by a pressure air line or by a compressor.

PERMEABILITY APPARATUS - THREE CELL - (PA-02)

Request a Quote

Same as above but supplied with three individual cells with stand. Three pressure gauges for indicating pressure in each cell are supplied apart from the main pressure gauge which indicates pressure in chamber.

CONCRETE PERMEABILITY APPARATUS - SINGLE CELL - (PA-03)

Request a Quote

Same as above but suitable for 150mm dia x 150mm high sample.

CONCRETE PERMEABILITY APPARATUS - THREE CELL - (PA-04)

Request a Quote

Same as above but suitable for three cells for sample size 150mm dia x 150 mm high.

CONCRETE PERMEABILITY APPARATUS -SINGLE CELL - (PA-05)

Request a Quote

Same as above but suitable for sample size 100mm dia x 100mm high.

CONCRETE PERMEABILITY APPARATUS - THREE CELL - (PA-06)

Request a Quote

Same as above but suitable for three samples of size 100mm x 100mm high.

Salient Features

Accessories : Compressor with pressure gauge 0-20 kg/cm sq. with automatic pressure valve and pressure rubber hose.
Suitable for 440 volts A.C. three phase.
Specimen casting mould C.I. for 100 mm dia x 100mm high cylinders.
Specimen casting mould C.I. for 150mm dia x 150mm high cylinders.
Specimen casting mould C.I. for 150mm cubes.
Blow stove 1/2 litre capacity.
Resin
Bees wax
Wire brush
Chissel
Spare glass cylinder 500 cc capacity.

POZZOLANA CEMENT MORTAR PERMEABILITY APPARATUS - THREE CELL MODEL - (PA-07)

Request a Quote

For water proofing of concrete admixture and special water proof cements are used. Wate proofing of these compounds, is established by measuring permeability of standard mortar. Specimen with or without such water proofing compounds. Permeability apparatus is used to determine permeability to water of cement mortar specimens with or without water proofing compound.

Salient Features

Specifications : The mortar permeability apparatus comprises three brass/gun-metal cells mounted on a stand and a pressure chamber with a pressure regulator. The cell can accommodate 100 mm dia x 50 mm high specimen. Each cell assembly consists of one base plate. The base plate has one outlet for water and is recessed to hold the specimen in place with a ring washer in between. The top plate has an inlet for water and a suitable connector for the application of pressurised water in the cell. The mould and collar are clamped between the base plate and the top plate with the help of four tension rods and nuts. The cells are mounted on a stand. The pressure chamber is fitted with a pressure regulator which helps in regulating the pressure from 0-7 kg/sq.cm. The regulator has two pressure gauges, one for indicating the pressure in the chamber (0-10.5kg/sq.cm) and the other for indicating the testing pressure ( 0-7kg/sq.cm.). The pressure chamber is connected to the cells with pressure hoses and with couplings. This pressure chamber is fitted with schrader valve. Pressure is applied to the pressure chamber with help of a foot pump and rubber hose which are supplied with the instrument.

CEMENT MORTAR PERMEABILITY APPARATUS - SIX CELL MODEL - (PA-08)

Request a Quote

Same as above but six cell mounted on a stand

CEMENT MORTAR PERMEABILITY APPARATUS - TWELVE CELL MODEL - (PA-09)

Request a Quote

Same as above but twelve cell, mounted on a stand.

Salient Features

Accessories :Specimen casting mould cast iron with base plate 100 mm dia x 50 mm height.
Note : Where larger number of cells are used a suitable compressor in place of pressure chamber is recommended. This compressor can be supplied at extra cost.

PERMEABILITY APPARATUS - SINGLE CELL | PERMEABILITY APPARATUS - THREE CELL | CONCRETE PERMEABILITY APPARATUS - SINGLE CELL | CONCRETE PERMEABILITY APPARATUS - THREE CELL | CONCRETE PERMEABILITY APPARATUS -SINGLE CELL | CONCRETE PERMEABILITY APPARATUS - THREE CELL | POZZOLANA CEMENT MORTAR PERMEABILITY APPARATUS - THREE CELL MODEL | CEMENT MORTAR PERMEABILITY APPARATUS - SIX CELL MODEL | CEMENT MORTAR PERMEABILITY APPARATUS - TWELVE CELL MODEL

Home | Company Profile | Contact | Business Enquiry | Mail Us

We are manufacturers and exporters of Permeability Apparatus from India.