Shambhavi Impex

We are manufacturers and exporters of Static Cone Penetrometer from India.

Shambhavi ImpexStatic Cone Penetrometer
Shambhavi ImpexHomecompany profilecontactcompany enquirymail usShambhavi Impex
Shambhavi Impex
Shambhavi Impex


Material Testing Equipment
Bitumen - Asphalt Testing Equipment
Cement / Concrete Testing Equipment
Soil Testing Equipment
Survey Testing Equipment





LANGUAGEEnglishEnglishEspanolEspanolFrancaisFrancaisDeutschDeutschItalianoItalianoItalianoRussian

Civil Engineering Equipment » Soil Testing Equipment » Static Cone Penetrometer


Shambhavi ImpexSTATIC CONE PENETROMETER 3000 kg. Capacity (HAND OPERATED) - (SCP-01)

STATIC CONE PENETROMETER 3000 kg. Capacity (HAND OPERATED)
The drive is by means of a rack and pinion and is driven manually through a gearing arrangement. The gearbox rack and pinion are fixed on two upright pillars and the movement of the rack is guided by a bracket and two pillars. The loading is done hydraulically. The two pressure gauges 15cm dia one of low capacity 0-60kg/sq.cm. in 0.5kg/cm.sq. divisions and other 0-160kg/cm.sq. are provided to indicate the penetration resistance. Isolation valve is provided to automatically isolate the lower range gauge when it reaches the maximum capacity. The valve can be adjusted and locked at desired values between 20 to 60 kg/cm.sq. Provision is made to anchor the unit at site and there is provision for lateral shifting so that subsequent tests could be performed without having to shift the entire anchorage system.

Salient Features
  • The standard outfit is as under:
    Penetration cone, steel 60 angle 10 sq.cm. base area with friction jacket one.
    Mantle tube, non-uniform 36mm OD at the two ends and reduced dia in between with surrounding rod, working length 1 m .................. Fifteen.
    Load measuring head with automatic cut-off valve and oil can one set.
    Pressure Gauge 0 - 160 kg/cm.sq. ........................One.
    Pressure Gauge 0 - 60 kg/cm.sq. ..........................One.
    Auger with bolt .................................................... Four.
    Auger driving handle ............................................ Four.
    T-rod .................................................................. One.
    Spanner ............................................................... One.Note : Uniform diameter mantle tubes can be ordered at extra cost.
    Optional Extras: Mantle tube 36mm uniform O.D. with sounding rod, working length 1 mtr.
    Spares & Accessories : Steel cone, 60 degree, 10 sq.cm. base area. Mantle tube 36 O.D. at the ends and reduced dia in between with sounding rod. Working length 1 meter. Pressure gauge 6 inch dia 0-10 kg/cm.sq. in 0.1 kg/cm.sq. divisions. Sampler to go with the above equipment. Friction jacket for Friction Ratio.








Copyright © Shambhavi Impex. All Rights Reserved
Site Developed by IndiaMART InterMESH Limited